BES-Kühler

COIL

• Geometry: 32mm x 28mm
• Copper Tubes Ø3/8”
• “V” type aluminium fins.
• The finned coils are designed with aluminium fins spaced at 6mm crimped onto copper tubes.
• Maximum operating pressure 21 bar.
• Staggered copper tubes.
• The coil circuits are designed for refrigerants R404A, R507F, R449A, R507C, R134A, R407C.
• Different fin spacing can be selected as an option for 4mm to 12mm.
• Refrigerant distributor.

CASING

• Electrostatic powder coated RAL 9016 galvanized steel.
• Stainless steel or aluminum casing as optional.
• Hinged/Folding drain tray is standard for all models.

FANS

• Selection of a unit cooler with various fan number/diameter combinations offering the dimensional and air throw characteristics best adapted to the size of the cold room or market cooler.
• Selections should be confirmed by your Buzçelik Technical Specialist.
• Motor protection IP54 insulation class F.
• Working conditions -10°C/+50°C.

DEFROST

• B1 type defrost system suitable for -10°C/+5°C cold room applications.  
• Defrost heaters are applied on heat exchanger coil.
• This facility enables homogenous heat distribution for fast and efficient defrosting.

Optional Defrost Options

B1       : Light electric defrost (Coil)
B2       : -
HGD   : -
WD     : -

CAPACITY

• The nominal capacities calculated according to Eurovent EN328 standards that refer to  SC1-SC2 conditions  and are valid for R404A.

OPTIONS

• Different  casing color.
• Other tube wall thicknesses and fin spacing on request.
• Please  keep in touch with our sales department about your special needs that are not mentioned in the catalogue.

ACCESSORIES

• Casing  made of stainless steel or aluminum.
• Epoxy resin coated aluminium fins.